Submersible Pumps
Electric Generators
Booster Pumps
Industrial Pumps
Dosing Pumps
Sewage Pumps
Reverse Osmosis System
Water Filters
Steel And Flexibile Riser Pipes
Water And Fuel Meters

Upe, Ups series Circulator pumps, canned-rotor type electronic

Application :

Circulation of the water in :

  • Heating System in block of flats,schools, hospitals , hotels, industry etc.

Features and benefits : 

  • Low- Noise.
  • Low-energy.
  • Wide range.
  • Automatic performance adjustment.
  • simple installation - no extra equipment for fitting required

JP: Self-priming jet pumps

Technical Data : 
Flow Q : Max. 5 m3/h.
Head, H : Max 48 m.
Liquid Temp : 0°C to + 55°C.
Operat.pres.: max.6 bar.

Application : 
The pumps are suitable for:

Hobby activities.
Small industries.

Features and benefits : 
Stable operation even in case of air.
pockets in the liquid.

MS motors: Stainless steel 4 ”and 6 ”submersible motors

Technical Data : 
Motor Sizes :

4' motor: 0.37 kW to 7.5 kW.
6" motor: 5.5 to 30 kW.

Application : 
The pumps are suitable for liquid transfer in:

The Grundfos MS submersible motors can be fitted on all Grundfos SP A,SP pumps and can be used in Highpressure booster modules , type BM , BME. 

Features and benefits : 
Ovrprotection by means of abuilt-in tempcon temperature transmitter.
Standardized NEMA head and shaft end. 
Completely encapsulated in stainless steel. 
Liquid coold and has liquid lubricated bearings.

Tanks: Diaphragm and bladder tanks

Technical Data : 
Tank size:19-1000 L.
Liquid temp.:max.+70 °C.
Operat.pres.:max.7 bar.

Application : 
The diaphragm and bladder tanks are
used in:

Water supply systems in housing.
Pressure boosting systems in housing.
Industrial systems.

Features and benefits : 
Optimal water supply.
Reduced number of pump starts.
Ideal for drinking water.

CU 3,CU 300,CU 301: Control and monitoring units

Application : 
Monitoring and protection of pump installations. 

Features and benefits : 
Protection against dry running and too high motor temperature. 
Constant monitoring of pump energy consumption. 
Reading out of operating data via R100. 

MMS motors Stainless steel 6" , 8" , 10" , 12" rewindable submer

Technical Data : 
Motor sizes

6"motor: 0.37 to 37 kw .
8"motor: 22kW to 110 kW.
10"motor: 75kW to 190 kW.
12"motor : 147kW to 250 kW.

Application : 
The pumps are suitable for liquid transfer in:

The Grundfos MMS submersible motors can be fitted on all Grundfos SP and SP-G pumps.

Features and benefits : 
Wide range of rewindable motors. 
Easy rewinded. 
Protection against upthrust. 
High efficiency. 
6" and 8" have standardized NEMA head and shaft end.